Experimental data of lithium-ion batteries under galvanostatic discharge tests at different rates and temperatures of operation

In this paper, we report data from lithium battery cells from: Panasonic NCR-18650B (3350 mAh), LG Chem INR21700-M50 (4850 mAh) and A123 Systems ANR26650m1-B (2500 mAh). They own the same anode composition, graphite-based, and different cathode chemistry: lithium-nickel-cobalt aluminum-oxide (NCA), lithium-nickel-manganese-cobalt-oxide (NMC) and lithium-iron-phosphate (LFP), respectively. In this study, six cell samples were tested for each chemistry. The experiments consist in fully discharging the cells from 100% state-of-charge until the cell cutoff discharge voltage. The discharge is performed under controlled temperature conditions, namely 5 °C, 25 °C and 35 °C, and subjecting the battery cells to galvanostatic discharge rates ranging from C/20 to 5C, for NCA and NMC, and from C/20 to 20C, for LFP chemistry. The IncuMax IC-500R thermal chamber provides the reference temperature to the cell. The input current profiles are configured via the MITS Pro-software, and transmitted through the TCP/IP connection to the Arbin measurement system and the Arbin LBT21024. Voltage, current and cell surface temperature are measured on each cell and for each experiment to characterize the cells in terms of discharge capacity, discharge efficiency, thermal robustness, specific energy and specific power. A comprehensive analysis of the data is found in [1].