热重分析
结晶度
硅酮
马尾松
傅里叶变换红外光谱
木质素
硅油
接触角
材料科学
热稳定性
填料(材料)
复合材料
化学
核化学
制浆造纸工业
化学工程
有机化学
植物
生物
工程类
作者
Kufre Edet Okon,Ubong Ime Udoakpan
标识
DOI:10.4067/s0718-221x2019005000409
摘要
In this study, Pinus massoniana wood was heat treated with silicone oil to modify the chemical composition relative to the unmodified wood. Specifically, polysaccharide, lignin, extractives and ash contents were the properties investigated. The wood samples were first of all pre-heated in a micro-wave oven to ease heat transfer within the wood. Silicone oil heat treatment was carried out at 150, 180 and 210C for 2, 4, 8 h. The silicone oil heat treated wood was characterized by Fourier transformed infrared (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD) and contact angle. Results showed that silicone oil heat treatment caused significant decrease in the polysaccharide (P 0,0001) and ash contents (P 0,0001) and significant increase in the lignin (P 0,0001) and extractives contents (P 0,0001) as the treatment time increased. FTIR results showed that the chemical constituents of the wood were affected by the treatment, while TGA showed that the treated wood resulted in higher thermal stability with increase in the crystallinity index. Silicone oil heat treatment proved to be effective in increasing the contact angle of the wood.
科研通智能强力驱动
Strongly Powered by AbleSci AI