析氧
化学
镍
分解水
制氢
化学工程
氧气
氢
电解水
反应条件
无机化学
催化作用
氧还原反应
电催化剂
氧化还原
水煤气变换反应
反应机理
反应速率
作者
Yibin Yang,Jitao Yang,YiQin Duan,Xinghua Huang,Qichao Qu,Yuhao Zhang,Lijuan Dong,Zhihao Duan,Mingzhu Wu,Ying Li
摘要
Abstract Electrochemical water splitting represents a highly promising avenue for sustainable energy conversion and storage, paving the way for a future hydrogen-based society. This approach necessitates the development of durable and cost-effective electrocatalysts for the OER. In this study, we report the as-synthesized NiFe-based high-entropy compound grown on nickel foam via direct electrochemical deposition. Remarkably, electrodeposition onto 1×1 cm2 nickel foam was optimized by strategically varying critical parameters. Subsequently, the fabricated electrodes underwent evaluation for comprehensive water splitting within the identical flow cell under alkaline conditions. The best-performing sample, NiFe-2:1, required relatively low overpotentials of 232 mV to reach a current density of 10 mA cm-2 for the OER. The NiFe-2:1 hydroxides exhibit high entropy, which optimizes the flat-band potential (Efb) and carrier concentration (NA) in high-entropy NiFe-based electrocatalysts. This enhancement facilitates sensitive electron transfer, thereby reducing the kinetic barrier for the OER. Furthermore, this review thoroughly discusses potential degradation mechanisms of active sites and outlines corresponding mitigation strategies. It also offers insights into the discrepancies between research and the design of non-precious metal-based catalysts for the OER, as well as their implementation in practical devices.
科研通智能强力驱动
Strongly Powered by AbleSci AI