极性(国际关系)
化学
溶剂
乙二醇
化学工程
极地的
溶剂极性
化学极性
传质
吸收(声学)
膜
乙醚
相(物质)
离子键合
二甲基亚砜
吸附
山梨醇
分析化学(期刊)
乙烯
渗透
乙醚
傅里叶变换红外光谱
二甘醇
有机化学
光化学
微乳液
环氧乙烷
离子液体
质谱法
作者
Lingyu Shao,Yanlei Meng,Ziqing Shao,Tingwei Fang,Lu Jiang,Zhengda Yang,Da Xu,Chenghang Zheng,Shihan Zhang,Xiang Gao
标识
DOI:10.1021/acssuschemeng.6c06637
摘要
Abstract The development of high-performance biphasic absorbents is limited by empirical screening and the difficulty of balancing CO2 capacity, phase behavior, and regeneration energy. Here, the molecular polarity index (MPI), a descriptor of molecular surface polarity, is exploited to rationalize and shortlist physical solvents according to their compatibility with the polar species generated upon CO2 absorption. Built around 1-(2-aminoethyl) piperazine (AEP) as the reactive amine, a quaternary formulation incorporating ethylene glycol, dimethyl sulfoxide (DMSO), and diethylene glycol diethyl ether (DGDE) was assembled. MPI analysis showed that the polarity gap between DGDE and the highly polar carbamate/protonated-amine products drives phase splitting, whereas DMSO tunes the local polarity to retain the ionic products within a compact-rich phase. The optimized absorbent confined the rich phase to ∼53% of the total volume, concentrated over 96% of captured CO2 therein, and reached a loading of 0.58 mol/mol. 13C NMR confirmed that DMSO partitions chiefly into the lean phase, shielding it from thermal regeneration. Consequently, the regeneration duty dropped to 1.72 GJ/t CO2, while the absorption rate rose to 25.2 mmol/(m2·s), 2.05 times that of MEA. Coupling polarity matching with multicomponent tuning thus offers a transferable route to low-energy, mass-transfer-intensified CO2 capture.
科研通智能强力驱动
Strongly Powered by AbleSci AI