航空航天
机械加工
材料科学
微观结构
机械工程
质量(理念)
过程(计算)
相(物质)
冶金
基础(证据)
刀具磨损
复合材料
选择(遗传算法)
铣刀
端铣
刀具
工艺工程
工程制图
作者
Laifa Zhu,Kechuang Zhang,Bin Liu,Feng Jiang (95012),Xian Long Wu,Lulu Zhai,F. Thomas S. Huang,Wenbiao You,Tongtong Xu,Zhang Shanqin,Rongcheng Guo,Yipeng Xue,Xiaoya Chen
出处
期刊:Micromachines
[Multidisciplinary Digital Publishing Institute]
日期:2025-12-24
卷期号:17 (1): 19-19
被引量:2
摘要
High-quality hole machining of Ti-6Al-4V is critical for precision aerospace components but remains challenging due to the alloy's poor machinability. In this study, the influence of cutting parameters on milling force, burr formation and the hole quality of Ti-6Al-4V was investigated. The mechanical properties and microstructure of the milled holes were analyzed. The research results show that milling depth is the primary factor governing variations in milling force and burr formation. The minimum milling force of 3.61 N is achieved at a milling depth of 60 μm, a feed per tooth of 2 μm/z and a cutting speed of 31 m/min. Compared to pre-optimization parameters, the milling force is decreased by 91.74%. Correspondingly, entrance burr width and hole-axis deviation were substantially reduced, indicating marked improvement in hole quality and geometrical accuracy. Microstructural observations show no deleterious phase transformations or excessive work-hardening under the optimized regime. The results deliver quantitative guidelines for parameter selection and tool application in micro-hole milling of Ti-6Al-4V and provide a foundation for further process modelling and optimization for aerospace manufacturing.
科研通智能强力驱动
Strongly Powered by AbleSci AI