材料科学
极限抗拉强度
焊接
复合材料
激光器
热的
激光束焊接
偏转(物理)
生物医学工程
光纤激光器
光学
纤维
医学
物理
气象学
作者
Jun Huang,Mintao Yan,Yanyu Li,Yuxin Chen,Yuxin Chen
标识
DOI:10.1002/jbio.202500364
摘要
ABSTRACT Surgical incision closure and trauma repair are critical in surgery. Dual‐beam laser tissue welding achieves full‐layer skin tissue connection with minimal thermal damage via selective absorption of different laser wavelengths. This study investigates the impacts of laser scanning speed, spot spacing, and deflection angle on mechanical properties and thermal damage of skin tissues to optimize parameters. Through incision morphology observation, tensile strength tests, thermal denaturation analysis, and microtissue quantitative characterization, the optimal process parameters were obtained. Results show that tensile strength and thermal denaturation degree increase with scanning speed, exhibit a cyclic decreasing pattern with spot spacing, and significantly improve with deflection angle. When V = 200 mm/s, D = 0.5 mm, and θ = 60°, the incision achieves the highest connection strength, best thermal damage control, and overall performance. These findings provide technical references and data support for refined parameter models in vivo tests.
科研通智能强力驱动
Strongly Powered by AbleSci AI