Physical property improvement of alginate capsule by gellan gum, bacterial cellulose and chitosan
作者
Aungsana Prajaksangsiri,Pattara Thiraphibundet
标识
DOI:10.58837/chula.the.2020.1442
摘要
The kaffir lime oil (KLO) loaded alginate macrocapsules were prepared via a coacervation method using a coaxial glass-tube. The aims of this research were to improve the mechanical property of alginate capsule shell and to study KLO release profiles which altered by those additives. The addition of gellan gum and 2,2,6,6-tetramethylpiperidine-1-oxy radical (TEMPO)-oxidized bacterial cellulose (TOBC) in the shell-forming solution can improve the flexibility and compression strength of capsules. The size and shell thickness of capsules were in a range of 3-4 mm and 54-91 µm, respectively. Besides, the increase of TOBC amount achieved the smoother surface but increased the capsules turbidity. The scanning electron microscope (SEM) images showed that chitosan coating resulted in decreasing the rough surface of capsules. The compression strength of chitosan-coated capsules gradually increased if the chitosan concentration increased. KLO amounts releasing were evaluated by headspace solid phase microextraction gas chromatography (HS-SPME-GC) and followed up for 30 days. It is found that the KLO released profiles of chitosan-coated capsules were slower than uncoated capsules. This indicated that chitosan coating can retard the evaporation of core substance. Moreover, Chitosan-coated capsules prepared by immersing KLO-alginate capsules/CaCl2 in chitosan solution (method B) were more effective delay than those prepared by dropping capsules into CaCl2/chitosan solution (method A).