催化作用
铱
氧化物
氧气
析氧
导电体
材料科学
化学工程
化学
电化学
工程类
物理化学
冶金
电极
有机化学
复合材料
作者
Shabnam Zargarian,Camille Roiron,Giovanni Ferro,Plamen B. Atanassov
标识
DOI:10.1002/celc.202400625
摘要
Abstract Successful deployment of hydrogen technologies relies on converting electricity from renewable energy sources into hydrogen. Proton exchange membrane electrolyzers are currently the technology of choice for this transformation. These devices use electricity to split water molecules into hydrogen and oxygen. To build membrane electrode assemblies with low iridium loading, while maintaining good in‐plane conductivity, an extended network of iridium oxide is required. To this effect, we synthesize IrO2 catalysts on a non‐conductive titanium dioxide anatase support. The iridium oxide particles obtained are well dispersed on the surface of the support. Furthermore, at the optimal iridium oxide loading, a network of relatively small iridium oxide particles covers the surface of the support. Increasing the iridium oxide loading beyond this optimum does not bring any appreciable increase in connectivity and decreases the surface‐to‐mass ratio of iridium oxide, which is detrimental to the mass activity of the material. The synthesis method presented herein leads to the formation of an iridium oxide extended network that grants electrical conductivity to the material despite the high resistivity of the titanium dioxide anatase support. The result is a catalyst that enjoys the chemical stability of anatase but is also conductive and highly active for the OER.
科研通智能强力驱动
Strongly Powered by AbleSci AI