推力
机械
转子(电动)
物理
流量(数学)
加速度
涡流
计算流体力学
航空航天工程
经典力学
工程类
热力学
量子力学
作者
Erinc Erdem,Zeki Tuğberk Karasu,Sefa Yilmaz,A Hussain Yazan,Sinan Şal
标识
DOI:10.1115/gt2023-103514
摘要
Abstract This article aims at the investigation of rotor-rotor cavity flowfield using CFD and one-dimensional flow solver for a representative engine configuration. The numerical approach is validated against the test data of Firuzian et. al. for a simpler rotor-rotor cavity geometry, in terms of the location of zero radial velocity signifying the extent of entraining source region and the swirl ratio distributions in radial direction, for three different λT values. Afterwards the flowfield in the current configuration is numerically predicted using the same numerical approach at various engine thrust settings corresponding to a wide range of dissimilar rotational speed ratios (0.34–0.67). Zero radial velocity location is observed on the high-pressure structure and it moves from low radii at low thrust levels to medium radii at high thrust levels. On the low-pressure disk side, the flow is radially inward for all the cases. At low thrust settings the flowfield resembles a forced vortex-like flow, where torques generated on both disks prevent tangential acceleration of the flow.
科研通智能强力驱动
Strongly Powered by AbleSci AI