Study on Vibration Propagation Characteristics Caused by Segments Joints in Shield Tunnel

In recent years, with the development of urban rail transit, more and more attention has been paid to the vibration problems caused by its operation. As the main form of urban rail transit’s underground construction, the shield tunnel is the first to bear the brunt. However, the existing researches on the vibration of shield tunnel usually take it as a homogeneous barrel and do not consider the impact of its assembly joints on the vibration propagation. In this paper, to study the influence of the joints caused by the shield tunnel’s assembly forms on the propagation of vibration, two finite element models of shield tunnels with different assembly forms are established. The analysis and comparing results of these models show that the joints caused by segment assembly of shield tunnel have obvious hysteresis and reduction effect on the vibration waves and this ability is obviously related to its location. In addition, the ability to weaken the vibration wave is also related to the frequency of the vibration wave.