螺线管
材料科学
磁铁
超导磁体
电磁线圈
导电体
超导电性
高温超导
核工程
聚变能
铌锡
工作(物理)
机械工程
复合材料
电气工程
凝聚态物理
核物理学
等离子体
物理
工程类
作者
Yifei Wu,Weijun Wang,Huan Jin,Jing Jin,Jinhao Shi,Meng‐Liang Zhou,Chuanyi Zhao,Deng Ming,Bowei Tao,Jinggang Qin
标识
DOI:10.1109/tasc.2023.3339079
摘要
The China Fusion Engineering Test Reactor (CFETR) proposes the use of high-temperature superconductors as next-generation central solenoid coil magnets to excite a stronger magnetic field. Currently, REBCO and Bi-2212 are two candidate materials for high-temperature superconductors. For some time to come, the fusion reactor superconducting magnet system will keep using a Cable-In-Conduit Conductors (CICC) structure. The strength of current jacket materials can not meet the current requirements of CFETR central solenoid (CS) magnets at 4.2 K. The jacket of CICC has been prepared by N50H material in China, and some research and development work has been carried out. However, in the Bi-2212 magnet manufacturing process, the N50H jacket should undergo a series of procedures, especially the 890°C heat treatment process may cause its mechanical properties to decline. This paper introduces the mechanical properties of N50H jackets before and after aging heat treatment at different temperatures and discusses its influence on mechanical properties at low temperatures. The results show that the elongation is only about 15% at 4.2 K, which temporarily does not meet the requirements, N50H can not be used as jacket of Bi2212 wires at present.
科研通智能强力驱动
Strongly Powered by AbleSci AI