腐蚀
冶金
航空航天
铝
材料科学
盐雾试验
使用寿命
环境科学
复合材料
工程类
航空航天工程
作者
F. Peltier,Dominique Thierry
出处
期刊:Corrosion
[NACE International]
日期:2023-06-18
卷期号:79 (9): 1006-1016
摘要
Aluminum alloys are not immune to corrosion which can take the form of localized corrosion. Thus, the assessment of the corrosion behavior of aluminum alloys under atmospheric conditions is a major topic for the aerospace industry. One major difficulty in this task is the lack of robust and reliable accelerated corrosion test(s) in this field. Indeed, several tests as the neutral salt spray test (ASTM B117) are used to assess the general corrosion resistance of aluminum, but these tests were not developed specifically for the aerospace industry and are not representative of service conditions. The aim of the present study was to compare the results of various accelerated corrosion test conditions (ASTM B117, VDA 233-102, Volvo STD 423-0014) with newly developed test conditions. Hence, different accelerated corrosion tests were designed by varying several parameters in the Volvo STD 423-0014 such as the salt concentration, time of wetness, and relative humidity. The results obtained on eight aluminum alloys (2xxx, 7xxx, and Al-Li alloys) were then compared to marine exposures. From the results, one test provides the same type of corrosion attacks on the different alloys under atmospheric exposures in the marine site and a good acceleration factor.
科研通智能强力驱动
Strongly Powered by AbleSci AI