Surface Depth Analysis of Chemical Changes in Random Copolymer Thin Films Composed of Hydrophilic and Hydrophobic Silicon-Based Monomers Induced by Plasma Treatment as Studied by Hard X-ray Photoelectron Spectroscopy and Neutron Reflectivity Measurements

In this study, a silicon-based copolymer, poly(tris(trimethylsiloxy)-3-methacryloxypropylsilane)-co-poly(N,N-dimethyl acrylamide), thin film was subjected to plasma surface treatment to make its surface hydrophilic (biocompatible). Neutron reflectivity (NR) measurement of the plasma-treated thin film showed a decrease in the film thickness (etching width: ∼20 nm) and an increase in the scattering length density (SLD) near the surface (∼15 nm). The region with a considerably high SLD adsorbed water (D2O) from its saturated vapor, indicating its superior surface hydrophilicity. Nevertheless of the hydrophilicity, the swelling of the thin film was suppressed. Hard X-ray photoelectron spectroscopy (HAXPES) performed at various takeoff angles revealed that the thin-film surface (∼20 nm depth) underwent extensive oxidation. NR and HAXPES analysis quantitatively yielded the depth profiling of elemental compositions in a few tens of nm scale. Si oxidation and hydrogen elimination (probably CH3 groups) in the vicinity of the surface region increased the SLD and decreased the hydrophobicity. A combination of Soft X-ray photoelectron spectroscopy and NR measurements revealed the surface chemical composition and mass density. It was considered that the surface near the film was chemically composed close to SiO2, forming a gel-like (three-dimensional network) structure that is hydrophilic and suppresses swelling due to moisture, indicating it can be expected to maintain stable hydrophilicity on the film surface.