Re-Inventing Solution for Sustained Annulus Pressure: An Innovative Design Approach Using Thermosetting Resin

套管 材料科学 水泥 热固性聚合物 环空(植物学) 泄漏 复合材料 石油工程 固化(化学) 泥浆 补救措施 粘度 法律工程学 热的 沥青 偏转(物理) 环氧树脂
作者
Rasho Alo,N. Amy,R. Sipangkui,F. Awang Atim,Svein Normann,N. Fidzrus,C. Jintony,Robert B. Gilbert,Md Abdul Karim,M. Asmuni,Z. Mokhtar,I. Abd Aziz,Mariyati Mohd Nor,M. Rayman
标识
DOI:10.2118/228524-ms
摘要

Abstract This remedial intervention was designed to address a cement packer leak in a gas-producing well that had been compromised due to channeling from a previously set cement packer. The well was initially intended to produce from a newly perforated zone following the cement packer operation; however, post-job diagnostics revealed gas migration and pressure anomalies, indicating a loss of zonal isolation caused by cement channeling. The primary objective of the intervention was to restore integrity through a targeted cement packer leak repair using a Thermosetting resin slurry. This first-time approach in the East Malaysian upstream sector was selected after considering its liquidity, which enables penetration into micro-channels of the existing cement packer. Key considerations in the design phase included downhole temperature at the casing top and across the perforated zone, since the resin system is temperature-activated and its setting behavior depends on thermal exposure. Thermosetting resin offers customization based on well conditions, with immiscibility in water, low gel strength, and controllable viscosity making it an ideal candidate for leak remediation. The resin system was pre-engineered and lab-tested, with fine-tuning of specific gravity, thermal activation thresholds, curing time, and pumpability to match the well’s operational constraints. Slurry formulation and deployment strategy were based on leak rate evaluations and injectivity tests, while consistometer testing was used to align pumping time with viscosity behavior, ensuring the slurry remained pumpable during placement and achieved the desired setting depth. A detailed case study is presented, highlighting the technical design, operational planning, and execution phases of this temperature-set resin-based remedial operation. The collaboration between the oil operator and service partners underscores the importance of joint planning, real-time adaptation, and engineered solutions, with lessons learned providing valuable insights for future remedial cement packer.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
瘦瘦大米发布了新的文献求助10
刚刚
饺子发布了新的文献求助10
1秒前
风之子发布了新的文献求助10
1秒前
1秒前
感性的又琴完成签到,获得积分10
1秒前
3秒前
3秒前
3秒前
狂野谷冬完成签到 ,获得积分10
3秒前
FashionBoy的应助被345784505采纳,获得10
4秒前
xhds发布了新的文献求助10
4秒前
5秒前
5秒前
5秒前
轻松念之发布了新的文献求助10
6秒前
沫沫公主完成签到,获得积分20
6秒前
zyux发布了新的文献求助10
7秒前
宋清华发布了新的文献求助10
7秒前
风之子完成签到,获得积分10
7秒前
xiaoxiao完成签到,获得积分10
7秒前
7秒前
Jun发布了新的文献求助10
7秒前
9秒前
Chemisy1wang完成签到,获得积分10
9秒前
auau完成签到,获得积分10
10秒前
Yue发布了新的文献求助10
11秒前
qiuhuajin完成签到,获得积分10
12秒前
12秒前
不忘初鑫完成签到 ,获得积分10
12秒前
李健的应助被小黑米采纳,获得10
12秒前
连钧发布了新的文献求助10
13秒前
Z666666666完成签到,获得积分10
13秒前
香妃完成签到,获得积分10
13秒前
xiaohui发布了新的文献求助10
13秒前
qiuhuajin发布了新的文献求助10
14秒前
14秒前
纪十三发布了新的文献求助10
15秒前
研友_wZrxbL完成签到,获得积分10
15秒前
muli发布了新的文献求助10
16秒前
orixero的应助被wrx采纳,获得10
16秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8188013
求助须知:如何正确求助?哪些是违规求助? 9575913
关于积分的说明 21844012
捐赠科研通 7785789
什么是DOI,文献DOI怎么找? 3435148
关于科研通互助平台的介绍 2559521
邀请新用户注册赠送积分活动 2482051