作者
Pamela Melroy,Lisa Hill,Erin Fowler,Roger C. Hunter,James Eagen,Brook Sullivan,Peter Will,Jeremy C. Palmer
摘要
For the past 50 years, the morphology of satellites has remained fundamentally unchanged, regardless of the evolutions happening in other industries in manufacturing, communications and software. Major systems and subsystems that provide the services of the spacecraft—such as power, attitude control, and others—are the same whether in the James Webb Space Telescope, a large communications satellite, the Mars Reconnaissance Orbiter, or today's small cubesats. The shrinking of the satellite has been driven by the need for lower-cost solutions, but performance measures such as reliability, life, resolution, and data rates have followed the trend in mass by decreasing accordingly. Satlets have been in development under the DARPA Phoenix program since 2012. A satlet is a cellularized satellite architectural unit, and the aim of the satlet construct is to break the massperformance relationship of traditionally architected space systems. When aggregated via hardware and software, satlets would provide the traditional spacecraft bus functions to a payload, but due to their modularity, they would reduce spacecraft design and integration time considerably and would provide redundancy and graceful degradation at a lower cost than would be required for the same redundancy in a traditionally architected space system. This new architecture solution would not be restricted to any particular spacecraft or payload size and would instead provide a means to scale the services provided by a spacecraft bus to its payload (such as power distribution, data processing, and attitude control) by simply adding more satlets to accommodate the payload requirements. The satlet development thrust of DARPA’s Phoenix program has progressed from Phase 1, when various satlet architectures and designs were considered, to Phase 2, which includes a scheduled flight experiment in Low Earth Orbit to test and validate the satlet architecture that was chosen for further development at the end of Phase 1. This will be the first flight of a small satellite with a satlet-based cellular aggregate bus. This paper will include a description of the configuration of the LEO flight experiment scheduled for early 2016 and outline the goals and objectives, as well as the associated tests that will be performed to evaluate the spacecraft’s aggregated subsystems. It will discuss the relevance of the satlet architecture to military and civilian missions and some examples 1 Senior Engineer, Space Systems Integration; Lecturer, University of Southern California Department of Astronautics; AIAA Member 2 Project Engineer, ManTech; AIAA Member 3 Founder and Chief Technologist, NovaWurks Inc 4 Program Manager, DARPA/TTO 5 Deputy Director, DARPA/TTO