Ballast is critical in promoting track drainage. This article gives an overview of machines that are used in ballast improvement. These machines are designed to remove and replace, or remove/clean and replace ballast. Vacuum excavators are now being used in the U.S., providing a mechanized method to remove unwanted material from the track structure. Additional ballast is then used to replace the unwanted material that was removed. Another type of machinery available is a ballast undercutter cleaner which removes all material from under the tie, screens the material, moves the waste along to the right-of-way, and then returns the cleaned ballast back into the track. The ballast is unloaded, and this allows the track to be raised and establish a standard ballast section under the ties and along the shoulder. The article includes descriptions of some new products and how they operate.