材料科学
法布里-珀罗干涉仪
温度测量
光纤
自由光谱范围
消光比
干涉测量
光功率
纤维
灵敏度(控制系统)
光纤传感器
光电子学
芯(光纤)
光学
熔接
激光器
物理
谐振器
波长
复合材料
工程类
量子力学
电子工程
作者
Chuanbiao Zhang,Xiongyan Tang,Min Zhang,Tigang Ning,Li Pei
出处
期刊:Seventh Symposium on Novel Photoelectronic Detection Technology and Applications
日期:2021-03-12
摘要
In this paper, we develop a novel optical fiber temperature sensor based on Fabry-Perot interferometer (FPI). The structure of the sensor includes a spliced seven-core fiber (SCF) and a piece of quartz glass capillary. During fabrication, we use the fusion splicer to move two SCFs into glass capillaries gradually. The length of the SCF is about 4 cm. In the cavity structure, the end faces of two SCFs are parallel to each other. The light transmitted in the optical fibers will be reflected twice at the two end faces. We can use the relationship between the length of the cavity and the power change of the reflected light to realize the sensing measurement of temperature parameters. We have gradually tested seven groups of reflective spectra as the temperature increases from 20°C to 50°C. The free spectral range (FSR) of the sensor has changed, also the beam propagation in the air cavity will cause loss, and the power of the reflection spectrum will change with the cavity length. The values of FSR and extinction ratio (ER) vary nonlinearly with temperature, and through data analysis, the equation describing the sensor was obtained, like the sensitivity function of FSR is y=107.7exp(-x/12.36)+5.35, the sensitivity function of ER is y=39.6exp(- x/15.75)+3.02, and the correlation coefficients of the two non-linear fitting are 0.991 and 0.998, respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI