材料科学
非晶态金属
过冷
冶金
玻璃化转变
结晶
可塑性
铸造
腐蚀
复合材料
合金
化学工程
聚合物
热力学
工程类
物理
作者
Dawei Ding,Jing Tan,Anhui Cai,Yong Liu,Hong Wu,Qi An,Pengwei Li,Yan Zhang,Qing Yang
标识
DOI:10.1016/s1003-6326(21)65690-x
摘要
(Zr53Al11.6Ni11.7Cu23.7)1–x(Fe77.1C22.9)x (x=0−2.2, at.%) bulk metallic glasses (BMGs) were prepared by copper mold suction casting method. Their glass forming ability and physical and chemical properties were systematically investigated. The glass forming ability is firstly improved with increasing x, and then decreased when x exceeds 0.44 at.%. Both glass transition temperature and crystallization temperature are increased, while the supercooled liquid region is narrowed, with Fe–C micro-alloying. The hardness, yielding and fracture strength, and plasticity firstly increase and then decrease when x reaches up to 1.32 at.%. The plasticity of the BMG (x=1.32 at.%) is six times that of the Fe-free and C-free BMG. In addition, by the Fe–C micro-alloying, the corrosion potential is slightly decreased, while the corrosion current density increases. The pitting corrosion becomes increasingly serious with the increase of Fe and C content.
科研通智能强力驱动
Strongly Powered by AbleSci AI