Simulation of passive filter design to reduce Total Harmonic Distortion (THD) in Energy-Saving Lamps (LHE) and Light Emitting Diodes (LED)

Abstract This paper discusses the design of a passive filter system for Energy-Saving Lamps (LHE) and Light Emitting Diodes (LED) using the MATLAB Simulink software. This type of lamp is a type of non-linear load that produces harmonics of current and voltage. However, this harmonic problem can be reduced using passive filters. To determine the size of the passive filter components, research was carried out in the form of measurements of power, power factor, voltage, current, THDi and THDv produced by the LHE and LED. The results of these measurements were simulated using MATLAB Simulink to determine the passive filter design that reduces the THD value on the LHE and LED. To reduce the level of current harmonics, a single tuned LC passive filter was designed. The filter, designed to work at a frequency of 50 Hz and is expected to reduce the level of harmonics in the 3 rd , 5 th , 7 th , 9 th , 11 th harmonic orders so that the THD produced by LHE and LED meets the IEEE 519-2014 standards. The simulation results of single tuned LC passive filter design can reduce THDi by 46.78% from the initial THD of 84.55% so that it becomes 37.77%.