介电谱
佩多:嘘
材料科学
光电流
太阳能电池
化学浴沉积
聚合物太阳能电池
电极
氧化锡
硫化锌
开路电压
化学工程
分析化学(期刊)
锌
光电子学
图层(电子)
薄膜
纳米技术
化学
兴奋剂
电化学
有机化学
冶金
电压
物理化学
工程类
物理
量子力学
作者
Takayuki Kuwabara,Masayuki Nakamoto,Yoshitaka Kawahara,Takahiro J. YAMAGUCHI,Kohshin Takahashi
摘要
A fluorine-doped tin oxide (FTO)/zinc sulfide (ZnS)/[6,6]-phenyl C61 butyric acid methyl ester (PCBM): regioregular poly(3-hexylthiophene) (P3HT)/poly(3,4-ethylenedioxylenethiophene): poly(4-styrene sulfonic acid) (PEDOT:PSS)/Au type organic solar cell (FTO/ZnS/PCBM:P3HT/PEDOT:PSS/Au, ZnS cell) with a 1 cm2 active area was first developed using transparent ZnS prepared on a FTO electrode by a chemical bath deposition method. The ZnS inserted solar cells were investigated by photocurrent-voltage (I-V) and ac impedance spectroscopy (IS) measurements. In photo I-V measurements, the ZnS cell exhibited scattered power conversion efficiencies (η) of 0.7%–1.2% when the FTO/ZnS electrode was not immersed in various aqueous solutions before the fabrication of the ZnS cells. In contrast, the solar cells with a surface-modified FTO/ZnS electrode by immersing in 0.1M Na2S solutions at pH 7–9 containing hydrosulfide ions (HS−) exhibited reproducible η of 1.5%–1.7%. The electric resistance components in the cell consisting of five layers were separately estimated by the IS measurement. The larger η of the solar cell using HS− modified ZnS was explained by the fact that the charge transport resistance at the ZnS/PCBM:P3HT interface became smaller due to this surface modification. When a continuous light irradiation was carried out for the modified cells, the resistance at the ZnS/PCBM:P3HT interface increased, being accompanied by the decrease in the η. That is, the cell performance was controlled mainly by charge transport velocity at the ZnS/PCBM:P3HT interface.
科研通智能强力驱动
Strongly Powered by AbleSci AI