Molding of PBO fabric reinforced thermoplastic composite to achieve high fiber volume fraction

In fiber‐reinforced plastic materials, the fiber volume fraction is one of the most important parameters, and it strongly influences the composite properties. However, it is hard to improve impregnation and the fiber volume fraction in fiber‐reinforced thermoplastics because thermoplastic resins have high melt viscosities. This study explored a reformative solution impregnation method for molding fabric‐reinforced thermoplastic composites with a high fiber volume fraction. The fiber volume fraction was significantly increased, to 60%, which is equal to that of fiber‐reinforced thermosetting plastic materials. A comparison indicated that a fiber‐reinforced thermoplastic and a fiber‐reinforced thermosetting plastic with the same reinforcing fiber had similar tensile properties and that the proposed molding method is effective in thermoplastic composite manufacture. POLYM. COMPOS., 34:953–958, 2013. © 2013 Society of Plastics Engineers