钼
X射线光电子能谱
无定形固体
材料科学
氧化物
价(化学)
金属
氧化态
氧化钼
相(物质)
无机化学
化学工程
核化学
冶金
化学
结晶学
有机化学
工程类
作者
E. Vernickaite,Martynas Lelis,Н. Цынцару,Vidas Pakštas,H. Cesiulis
出处
期刊:Chemija
[Lithuanian Academy of Sciences]
日期:2020-10-19
卷期号:31 (4)
被引量:22
标识
DOI:10.6001/chemija.v31i4.4317
摘要
The possibility to use highly saturated acetate bath to electrodeposit the mixed-phase materials containing Mo oxides has been investigated. The XRD characterization revealed that the as-deposited coatings are amorphous and consist only of MoO2 and MoO3 phases without traces of metallic Mo phase. This statement has been supported by XPS measurements, which reveal the presence of three different molybdenum oxidations states in electrodeposits: Mo4+, Mo5+ and Mo6+. It was found that the Mo6+ state prevails with 41% of total contribution, whilst Mo5+ and Mo4+ contribute to 28 and 31%, respectively. The deposits retain an amorphous structure up to 800°C; while molybdenum at this temperature is predominantly oxidized to the Mo6+ state (91%). These results, coupled to those of SEM and EDS, revealed that concentrated acetate bath could be used mainly for the formation of the mixed valence molybdenum oxide film unlike to the deposition of the metallic Mo phase.
科研通智能强力驱动
Strongly Powered by AbleSci AI