Damage-free highly efficient plasma-assisted polishing of a 20-mm square large mosaic single crystal diamond substrate

Abstract Plasma-assisted polishing (PAP) as a damage-free and highly efficient polishing technique has been widely applied to difficult-to-machine wide-gap semiconductor materials such as 4H-SiC (0001) and GaN (0001). In this study, a 20-mm square large mosaic single crystal diamond (SCD) substrate synthesized by microwave plasma chemical vapor deposition (CVD) was polished by PAP. Argon-based plasma containing oxygen was used in PAP to modify the surface of quartz glass polishing plate, and a high material removal rate (MRR) of 13.3 μm/h was obtained. The flatness of SCD polished by PAP measured by an interferometer was 0.5 μm. The surface roughness measured by both scanning white light interferometer (SWLI) (84-μm square) and atomic force microscope (AFM) (5-μm square) was less than 0.5 nm S q. The micro-Raman spectroscopy measurement results of mosaic SCD substrate processed by PAP showed that residual stress and non-diamond components on the surface after PAP processing were below the detection limit.