Double Layer Growth of ZnO Nanorods by a Low Temperature Solution Method: Synthesis and Photoluminescence Properties

In the present work, double layer Zinc Oxide (ZnO) nanorods (NRs) were fabricated hydrothermally and their photoluminescence (PL) properties were investigated. Two different recipes and their combination were used to obtain double layer vertically well-aligned ZnO NRs. These recipes include polyethylenimine (PEI) and citrate as additives in the growth solution resulting long NRs with a broad defect emission and relatively short NRs with a near band-edge ultraviolet (UV) emission, respectively. Double layer growth of long-long (LL), long-short (LS) and short-short (SS) ZnO NRs were considered. Grown samples were annealed in a forming gas atmosphere for a better quality NR structure. LL ZnO NRs (long ZnO NRs grown on a long ZnO NR layer) with a 65 µm thickness showed a broad yellow-orange PL emission and no any near band-edge UV emission was observed. LS ZnO NRs representing short ZnO NRs grown on a long ZnO NR layer (LS1= 36 µm, LS2= 48 µm and LS3= 44 µm) showed an enhanced near band-edge UV emission when compared to that of the long ZnO NRs. The UV intensity was found to decrease with the increase in thickness of the NRs in LS samples. Finally, SS ZnO NR sample, (short ZnO NRs grown on a short ZnO NR layer) which has a thickness of 33 µm, displayed a stronger near band-edge UV emission with a negligible broad emission than that of as-grown SS ZnO NRs (UV peak intensity ratio 59). This study should be important for applications where longer NRs with enhanced PL properties are strictly required.