贝氏体
材料科学
等温过程
针状铁素体
微观结构
板条
冶金
等温转变图
电子背散射衍射
透射电子显微镜
铁氧体(磁铁)
奥氏体
方向错误
针状的
扫描电子显微镜
热机械加工
光学显微镜
复合材料
再结晶(地质)
层状结构
锡
合金
成核
晶界
结晶学
粒度
电子衍射
连续冷却转变
动态再结晶
合金钢
衍射
作者
Yanning Liu,Chunfang Wang,Jikang Li,Zhaobo Wu
出处
期刊:
[Springer Science+Business Media]
日期:2026-10-29
卷期号:59 (1)
标识
DOI:10.1007/s13404-026-00378-0
摘要
The isothermal phase-transformation behaviour of commercial rolled 42CrMo medium-carbon Cr-Mo alloy steel was systematically investigated over a broad temperature range of 350–725 °C using Gleeble-3800 thermomechanical simulation, combined with optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron back-scatter diffraction (EBSD), and X-ray diffraction (XRD). The ferrite-pearlite microstructure forms at 625–675 °C, exhibiting polygonal ferrite and lamellar pearlite. Within the bainite transformation regime (350–475 °C), typical morphological transition from lower bainite to upper bainite was observed: specimens isothermally held at 400 °C show fine acicular bainite with carbide-like features inside ferrite laths, whereas samples transformed at 450 °C develop sheaf-type upper bainite with carbide-like precipitates distributed along lath boundaries. EBSD characterization reveals non-monotonic evolution of ferritic orientation-domain size and grain-boundary misorientation distribution across the bainite transformation temperature window. The area-weighted equivalent circular diameter (ECD) of BCC orientation domains reaches maximum near 450 °C, while the fraction of 2–15° low-angle grain boundaries achieves its maximum value at 425 °C. TEM-EDS characterisation confirms ubiquitous existence of TiN inclusions; MnS particles are frequently observed adjacent to TiN in lower-bainite specimens, and these particles are inherited from steel-making solidification process rather than precipitated during isothermal bainite transformation. XRD phase screening demonstrates that bcc/bct ferritic matrix dominates the microstructure for samples treated between 400 and 450 °C, and retained austenite is only present as a minor constituent below the reliable quantitative detection limit of the current experimental setup. This work quantitatively clarifies the temperature-dependent microstructural evolution law of isothermally transformed 42CrMo steel, provides experimental reference for heat-treatment process optimisation of this widely used engineering steel.
科研通智能强力驱动
Strongly Powered by AbleSci AI