计算机科学
故障覆盖率
响应时间
架空(工程)
传输(计算)
实时计算
断层(地质)
故障检测与隔离
带宽(计算)
签名(拓扑)
嵌入式系统
有界函数
接口(物质)
陷入故障
测试压缩
试验数据
计算机硬件
内置自检
容错
自动测试模式生成
搜索引擎索引
断层模型
记忆测验
压实
考试(生物学)
端口(电路理论)
算法
作者
Jawon Koo,Eunki Kim,Hankyu Lee,Han-Bin Lee,Dongsup Song
出处
期刊:Electronics
[Multidisciplinary Digital Publishing Institute]
日期:2026-11-03
卷期号:15 (21): 5097-5097
标识
DOI:10.3390/electronics15215097
摘要
In high-bandwidth memory (HBM) testing through the direct access (DA) port, the response-path bandwidth is far lower than the internal data bandwidth. Because most read responses are fault-free, transferring every response incurs substantial transfer overhead and test time. This paper proposes three fault-data transfer methods. Selective staggered read suppresses fault-free response transfers and overlaps faulty-response transfers with the subsequent read latency. Duplicate fault suppression replaces identical fault responses at consecutive addresses with a short duplicate code. Failing-bit indexing transmits only the positions of failing bits. The proposed architecture controls whether, when, and in which format each response is transferred without modifying the DA port interface or the March command and address sequence. Cycle-accurate simulation of an HBM2 test model shows that, across Random, Column-Correlated, and Row-Correlated Fault models with fault rates of 0.01–5%, the proposed method reduces the DA response data by 99.32–99.99% and the total test time by 44.86–45.01% compared with the conventional method. Synthesis shows that the added logic is smaller than that of on-chip fault collection and signature compaction schemes and independent of the memory capacity. The proposed architecture attains nearly the same test time as on-chip fault collection and signature compaction schemes while delivering every faulty response and its failing-bit positions to the tester, so that its diagnostic coverage is not bounded by on-chip storage.
科研通智能强力驱动
Strongly Powered by AbleSci AI