Evaluation of the influence of low Mg content on the mechanical and microstructural properties of β titanium alloy

材料科学 微观结构 罗克韦尔标度 衍射仪 合金 烧结 扫描电子显微镜 粉末冶金 马弗炉 冶金 钛 复合材料 生物化学 化学 煅烧 催化作用
作者
Mariana Correa Rossi,Daniel Leal Bayerlein,Eber de Santi Gouvêa,Montserrat Vicenta Haro Rodríguez,Ángel Vicente Escuder,V. Amigó
出处
期刊:Journal of materials research and technology [Elsevier BV]
卷期号:10: 916-925 被引量:8
标识
DOI:10.1016/j.jmrt.2020.12.103
摘要

It was investigated in order to better understand the relationship between the low presence of Mg in the Ti–Nb–Sn alloy in its mechanical and microstructural properties by the powder metallurgy technique for biomedical application. The blended powders with the nominal composition of Ti–34Nb–6Sn were obtained by milling at 200 rpm/40 min, compacted at 200 MPa. The sintering were carried out at 900 °C/2 h and at 1110 °C/2 h, followed by furnace cooling. The particle size was characterized by the dynamic image analyzer (DIA). The phases quantification and their microstructure were characterized by an X-ray diffractometer (XRD) and a scanning electron microscope (SEM). The porosity was characterized by the Archimedes method and also bi-dimensionally by the Image J software. The mechanical tests were performed by the impulse excitation (Sonelastic ®) technique, in order to evaluate the elastic modulus (E) of the sintered materials and the hardness and resistance by the Rockwell method. The results indicated that the sintering at 1100 °C in the materials with Mg, still had particles of Nb not diffused. The microstructure was basically formed by two phases with the presence of Nb non-diffused in all conditions except at 1100 °C in the system without Mg. The β phase % for systems without and with Mg at 900 °C was approximately 80% and 65%. At 1100 °C, 76% and 78%. The E and hardness were 31 GPa and 226 MPa at 900 °C; 49 GPa and 344 MPa at 1100 °C for materials with Mg. The O and N content increased approximately 1.3 times when adding Mg powder.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
max完成签到,获得积分10
1秒前
喜滋滋完成签到,获得积分10
1秒前
2秒前
3秒前
张伟发布了新的文献求助10
5秒前
5秒前
vivi完成签到,获得积分10
5秒前
5秒前
123完成签到,获得积分10
6秒前
syvshc的应助被wqf采纳,获得10
6秒前
冷静秀完成签到 ,获得积分10
7秒前
terryok完成签到,获得积分10
7秒前
苹果寻桃完成签到,获得积分10
7秒前
lx的应助被Aurora采纳,获得10
8秒前
bingrui发布了新的文献求助10
9秒前
9秒前
不吃茄子完成签到 ,获得积分10
9秒前
不圆月发布了新的文献求助10
9秒前
10秒前
七七发布了新的文献求助10
10秒前
hz发布了新的文献求助10
11秒前
晚峰完成签到,获得积分10
12秒前
miaofajin完成签到,获得积分10
12秒前
难过台灯完成签到,获得积分10
13秒前
海盗船长完成签到,获得积分10
13秒前
tnt完成签到,获得积分20
13秒前
诶诶完成签到,获得积分10
13秒前
科研通AI6.2的应助被祥云齐天采纳,获得30
13秒前
暖暖完成签到,获得积分10
14秒前
七七完成签到,获得积分10
15秒前
15秒前
超级故事发布了新的文献求助10
15秒前
UNIQUE发布了新的文献求助10
16秒前
鹿饮溪给鹿饮溪的求助进行了留言
16秒前
李健的小迷弟的应助被天天采纳,获得10
17秒前
JamesPei的应助被天天采纳,获得10
17秒前
赘婿的应助被天天采纳,获得10
17秒前
JamesPei的应助被天天采纳,获得10
17秒前
Lucas的应助被天天采纳,获得10
17秒前
orixero的应助被天天采纳,获得10
17秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 2000
Agyptische Geschichte der 21.30. Dynastie 510
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
基于界面调控的高效湿气发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8191353
求助须知:如何正确求助?哪些是违规求助? 9578210
关于积分的说明 21857444
捐赠科研通 7790659
什么是DOI,文献DOI怎么找? 3436607
关于科研通互助平台的介绍 2560359
邀请新用户注册赠送积分活动 2483315