动力传动系统
机器人
执行机构
控制理论(社会学)
摇摆
Lift(数据挖掘)
声学
工程类
汽车工程
材料科学
计算机科学
机械工程
扭矩
电气工程
物理
人工智能
数据挖掘
热力学
控制(管理)
作者
Guangping Wu,Ziyang Wang,Yixiong Wu,Jiaxin Zhao,Feng Cui,Yichen Zhang,Wenyuan Chen
出处
期刊:Biomimetics
[Multidisciplinary Digital Publishing Institute]
日期:2024-04-09
卷期号:9 (4): 226-226
标识
DOI:10.3390/biomimetics9040226
摘要
In this paper, we proposed a miniature quadrupedal piezoelectric robot with a mass of 1.8 g and a body length of 4.6 cm. The robot adopts a novel spatial parallel mechanism as its transmission. Each leg of the robot has two degrees of freedom (DOFs): swing and lift. The trajectory necessary for walking is achieved by the appropriate phasing of these two DOFs. A new manufacturing method for piezoelectric actuators was developed. During the stacking process, discrete patterned PZT pieces are used to avoid dielectric failure caused by laser cutting. Copper-clad FR-4 is used as the solder pad instead of copper foil, making the connection between the pad and the actuator more reliable. The lift powertrain of the robot was modeled and the link length of the powertrain was optimized based on the model. The maximum output force of each leg can reach 26 mN under optimized design parameters, which is 1.38 times the required force for successful walking. The frequency response of the powertrain was measured and fitted to the second-order system, which enabled increased leg amplitudes near the powertrain resonance of approximately 70 Hz with adjusted drive signals. The maximum speed of the robot without load reached 48.66 cm/s (10.58 body lengths per second) and the payload capacity can reach 5.5 g (3.05 times its mass) near the powertrain resonance.
科研通智能强力驱动
Strongly Powered by AbleSci AI