氮化硅
材料科学
热导率
陶瓷
氮化物
工程物理
硅
光电子学
纳米技术
复合材料
物理
图层(电子)
作者
Aleksandra Šaponjić,Sladjana Maslovara,Milan Gordić
出处
期刊:Thermal Science
[Vinča Institute of Nuclear Sciences]
日期:2024-08-23
卷期号:29 (1 Part A): 307-323
被引量:4
标识
DOI:10.2298/tsci240615187s
摘要
Silicon nitride (Si3N4) with high thermal conductivity is one of the most promising substrate materials for the next-generation power devices. There are several ways to improve thermal conductivity of Si3N4. Substantially higher thermal conductivities for the Si3N4 ceramics could be attained by reduction of lattice oxygen content or by the increasing the ?/? phase ratio during nitridation thus enhancing grain growth during post-sintering. The method of purification of the grains and decreasing the two-grain junction films by adding large ?-Si3N4 grains to the raw Si3N4 powder, seeding by grain growth of Si3N4 crystals in polycrystalline ceramics also improves thermal conductivity. High thermal conductivity can be further achieved by development a textured micro-structure in which elongated ?-Si3N4 grains are oriented almost unidirectional. This paper summarizes the extrinsic factors governing the thermal conductivity of Si3N4 ceramic regarding micro-structural parameters such as lattice defects in single-crystal, sintering additives, change in microstructural parameters like ?/? ratio, grain size, aspect ratio, grain orientation and the morphology, composition of grain-boundary, secondary phases, processing method.
科研通智能强力驱动
Strongly Powered by AbleSci AI