This paper reports on titanium aluminides based on {gamma}-TiAl which are currently being considered as candidate materials for elevated temperature applications as a result of their low density and attractive high temperature properties. Factors which have so far impeded their practical application include limited ductility and toughness at ambient temperature, and problems associated the their deformation behaviour during high temperature thermomechanical treatment. Some progress has been made in overcoming these difficulties by selecting alloy compositions which are sub-stoichiometric, eg. 48 at% Al, and alloying them with elements such as Nb, Mn, Cr and v. Although it is recognized that some of these improvements are related to microstructural effects associated with the two-phase microstructures based on {gamma}-TiAl and {alpha}{sub 2}(Ti{sub 3}Al) in such alloys, it is not clear whether the role of the alloying elements is primarily microstructural in nature via effects on the {gamma}/{alpha} phase equilibria or whether the alloying elements exert their influence via intrinsic factors associated with the {gamma}-TiAl crystal lattice. The deformation behavior of the {gamma}-TiAl phase is inherently related to the ordered crystal structure (f.c.t., c/a {approximately} 1.02) with Ti and Al atoms occupying alternate (002) planes, and the energetics and dynamics of the various possiblemore » dislocation glide mechanisms. These in turn are influenced by the anti-phase domain boundary (APB) energy and the planar fault energies which determine the dislocation fine structure. Furthermore, it has been suggested that the covalent nature of bonding due to charge anisotropy around Ti atoms influences dislocation mobilities by changing the depth of Peierls' valleys in different crystallographic directions.« less