We have used direct numerical simulation to examine both lam-inar and turbulent flows in circular pipes with smoothly corru-gated walls, where the corrugation wavelength has been kept constant at 0.419D, and the corrugation height was varied from zero to 0.08D. Flow rates have been varied in steps between low values that provide laminar flow, up to higher values where the flow is turbulent: the maximum bulk flow Reynolds number for the smooth pipe was ReD =UD/ν = 10×103, giving a fric-tion Reynolds number Reτ = 314. Even in the laminar regime, the larger corrugation heights produce flow separation, and the proportion of pressure drop that is attributable to pressure drag can be of order 50%, rising to approx 85 % in turbulent flow. In turbulent flow, near-wall structure is heavily influenced by the effects of flow separation and reattachment. However, fur-ther from the wall, statistics show standard outer-flow scaling relationships, indicating that (as for standard roughness treat-ments) the outer flow is mainly affected by the value of wall drag, rather than details of the wall shape. In addition to sup-plying more detail on the above, we provide friction factor vs. bulk flow Reynolds number values that compare our results with Nikuradse’s classic sand-roughened pipe flow data.