选择性激光熔化
材料科学
微观结构
复合材料
马朗戈尼效应
相(物质)
色散(光学)
激光功率缩放
复合数
氧化物
扫描电子显微镜
选择性激光烧结
铝
烧结
激光器
冶金
对流
光学
热力学
物理
有机化学
化学
作者
Lianfeng Wang,Jiubin Jue,Mujian Xia,Lijie Guo,Biao Yan,Dongdong Gu
出处
期刊:Metals
[Multidisciplinary Digital Publishing Institute]
日期:2016-11-19
卷期号:6 (11): 286-286
被引量:54
摘要
This paper presents a comprehensive investigation of the phase and microstructure, the thermodynamic behavior within the molten pool, and the growth mechanism of in situ oxide dispersion-strengthened (ODS) aluminum-based composites processed by a selective laser melting (SLM) additive manufacturing/3D printing process. The phase and microstructure were characterized by X-ray diffraction (XRD) and a scanning electronic microscope (SEM) equipped with EDX, respectively. The thermodynamic behavior within the molten pool was investigated for a comprehensive understanding on the growth mechanism of the SLM-processed composite using a finite volume method (FVM). The results revealed that the in situ Al2Si4O10 ODS Al-based composites were successfully fabricated by SLM. Combined with the XRD spectrum and EDX analysis, the new silica-rich Al2Si4O10 reinforcing phase was identified, which was dispersed around the grain boundaries of the aluminum matrix under a reasonable laser power of 200 W. Combined with the activity of Marangoni convection and repulsion forces, the characteristic microstructure of SLM-processed Al2Si4O10 ODS Al-based composites tended to transfer from the irregular network structure to the nearly sphere-like network structure in regular form by increasing the laser power. The formation mechanism of the microstructure of SLM-processed Al2Si4O10 ODS Al-based composites is thoroughly discussed herein.
科研通智能强力驱动
Strongly Powered by AbleSci AI