材料科学
聚苯胺
腐蚀
环氧树脂
纳米复合材料
介电谱
氧化物
石墨烯
涂层
盐雾试验
复合材料
化学工程
电化学
聚合物
冶金
纳米技术
电极
化学
物理化学
工程类
聚合
作者
Yunyun Huang,Borui Zhang,Jian Wu,Ruoyu Hong,Jinjia Xu
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2022-08-17
卷期号:14 (16): 3355-3355
被引量:19
标识
DOI:10.3390/polym14163355
摘要
To address the challenging issues of metal materials corrosion in industries, which has caused huge economic losses and security threats to many facilities in marine environments, functional polymer coatings have been widely used and regarded as one of the simplest and most effective methods to prevent such an undesirable event. In this study, a new type of coating filler consisting of graphene oxide/polyaniline/polydopamine (GO-PANI-PDA) nanocomposites has been successfully synthesized. The morphology, structure, composition, and corrosion resistance performance of the GO-PANI-PDA (GPP) nanocomposites were investigated via a series of characterization methods. The results from our electrochemical impedance spectroscopy, potentiodynamic polarization curve and salt spray experiment showed that the best corrosion resistance performance of the coating is from GPP 21 with the epoxy/GO-PANI:PDA ratio of 2:1, which exhibited a positive corrosion potential (-0.51 V) shift from epoxy/GO-PANI coating (-0.64 V). The corrosion current density (3.83 × 10-8 A/cm2) of GPP 21 is nearly an order of magnitude lower than that of epoxy/GO-PANI (7.05 × 10-7 A/cm2). The good anti-corrosion performance was fascinatingly observed in salt spray tests even without obvious corrosion phenomenon after 30 days of testing. Due to these remarkable properties, GPP nanocomposites can be an outstanding candidate for the rapid development of broadband shielding and anticorrosive materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI