噻吩
共聚物
热稳定性
有机太阳能电池
材料科学
降级(电信)
破损
高分子化学
化学工程
化学
有机化学
聚合物
计算机科学
复合材料
电信
工程类
作者
Hiroki Saito,Takayuki Uchiyama,Yoshiko Okada-Shudo,Wendimagegne Mammo,Tjaart P. J. Krüger,Varun Vohra,Newayemedhin A. Tegegne
标识
DOI:10.1088/1361-6463/aca987
摘要
Abstract With the increasing performance of organic solar cells (OSCs), the design of stable donor materials is of paramount importance. In this work, we synthesised a simple alternating copolymer with thiophene and BDT (P3T-BDT) units to understand the impact of incorporation of BDT on the thermal stability of the commonly used thiophene-based OSCs. OSCs fabricated with P3T-BDT:PC 71 BM and P3HT:PC 71 BM with 1:4 ratios displayed a different degradation kinetics despite their similar initial power conversion efficiency (PCE). The PCE of P3HT-based device degraded by half while the P3T-BDT-based device lost only 15% of its initial PCE after thermally being degraded at 85 ∘ C for 48 h mainly due to the decrease in J s c . Thermally-induced degradation of P3HT caused chain breakage while the P3T-BDT remained intact. The surface morphology of P3HT:PC 71 BM film exhibited a large increase in roughness in the first few hours leading to a loss of more 40% of its initial PCE while the P3T-BDT based OSC had a similar roughness throughout the accelerated ageing. This is also confirmed by the growth of the PL intensity of P3HT:PC 71 BM while P3T-BDT:PC 71 BM remained the same confirming a suppression of demixing of the donor and acceptor in the latter. In summary, the addition a BDT unit in the thiophene-based homopolymer was found to improve the thermal stability thiophene-based OSCs.
科研通智能强力驱动
Strongly Powered by AbleSci AI