热失控
电池(电)
分离器(采油)
阴极
短路
材料科学
内阻
发热
核工程
涓流充电
电镀(地质)
焦耳加热
热的
锂离子电池
电气工程
磷酸铁锂
开路电压
汽车蓄电池
极化(电化学)
锂电池
阳极
降级(电信)
复合材料
储能
热稳定性
加速老化
汽车工程
作者
Dongliang Guo,Eun-Jee Chun,Yawei Lu,Yun Zhang,Jialong Liu
标识
DOI:10.1002/ente.202502074
摘要
Lithium‐ion battery is important to proliferation of green energy and the solution to environmental pollution. However, safety is always one issue to be solved during its usage. External short circuit (ESC) is a common abuse. Battery aging at low temperature decreases thermal stability of battery. This article studies the ESC behavior and mechanism change of lithium‐ion battery after cycling at low temperature. The results indicated that battery aging at low temperature is mainly caused by lithium plating and cathode degradation. Lithium plating grows more and cathode decays more serious after state of health (SOH) of battery less than 90% SOH. The results of ESC indicate that Joule heat from polarization resistance account for the most heat generation after ESC. Shutdown of battery is caused by separator shrink and micro internal short circuit. Although micro internal short circuit occurs, thermal runaway does not occur for fresh battery. However, thermal runaway occurs to aged battery. The safety of aged batteries decreases much more after SOH of battery less than 90%. This is related to more lithium plating and more serious degradation of cathode materials. The results are important for thermal runaway prevention of aged battery.
科研通智能强力驱动
Strongly Powered by AbleSci AI