Use of Organic Acids as Additives for Plasma Electrolytic Oxidation (PEO) of Titanium

The present study investigates the influence of organic acids, added to the electrolytic solution, on the structure, morphology, and corrosion behaviour of plasma electrolytic oxidation (PEO) coatings produced on titanium grade 2. Particular attention is paid to the role of functional groups in the modification of the oxide’s properties. For this reason, all three selected acids, namely glutaric, glutamic, and tartaric acid, display two carboxylic groups, thus they interact with the substrate material mainly through –COO− adsorption. However, glutamic acid also has an amine group, while tartaric acid has two hydroxyl groups. The presence of such additional functional groups is found to impact the formation of the PEO coatings. According to scanning electron microscopy (SEM) analyses, the number of defects and their dimension increase with an increasing number of active groups present in the organic molecules. Then, when glutaric acid with only two carboxyl groups, is employed as an additive, smaller pores are produced. The dimension of defects increases when glutamic and tartaric acid are used. X-ray diffraction (XRD) testing demonstrates that rutile and anatase are present in all the coatings and that when using tartaric acid, a relatively high level of amorphism is reached. The electrochemical and corrosion behaviours are evaluated by potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) performed in a heated sulphuric acid solution. It is found that all types of coatings provide protection against corrosion, with oxides produced using glutamic acid showing the lowest corrosion current density (0.58 mA·m−2) and low corrosion rate (1.02 μm·y−1).