Perovskite Light-Emitting Devices Based on Solid-State Diffusion In Situ Dynamic Thermal Crystallization

Due to the excellent photonic and electrical properties of metal halide perovskite materials, perovskite light-emitting devices have the potential to replace OLED devices as the next-generation of commercial light-emitting devices. In this article, we controlled the surface morphology of PbBr2 using an in situ dynamic thermal crystallization process, which increased the specific surface area of the films and promoted the solid-state diffusion rate. The CsPbBr3 PeLEDs prepared using this method achieved a maximum current efficiency of 7.1 cd/A at the voltage of 5 V, which was 200% higher than devices prepared using traditional spin-coating processes. These results proved that the in situ thermal dynamic crystallization process effectively improved the film quality of perovskite materials.