Design and Performance Analysis of Zinc Oxide Thin Film Transistor (ZnO2 TFT) with High-k Dielectric Materials

ZnO has been extensively used as oxide in the thin film electronics industry because of its performance advantages such as electrical and optical properties. This study represents the design and optimization of the ZnO thin film transistor (TFT). The characteristics of the device are studied using the software Silvaco TCAD ATLAS. The improvement in the performance of the device has been observed in optimizing dielectric layer thickness ([Formula: see text]). Further SiO 2 oxide layer is replaced with the high-[Formula: see text] dielectric to improve its performance. The use of high-[Formula: see text] dielectric gives the concept of equivalent oxide thickness (EOT) in which physical thickness (PT) of the dielectric layer is increased without increasing electric thickness (effective thickness), which improves the reliability of the device. The electrical parameters extracted for the low-[Formula: see text] SiO2 ([Formula: see text]) at thickness (TSiO2) 50[Formula: see text]nm are [Formula: see text][Formula: see text]A, [Formula: see text][Formula: see text]A, [Formula: see text], [Formula: see text][Formula: see text]V/decade, [Formula: see text][Formula: see text]V. The high performance of the device has been achieved using Al 2 O 3 and HfO 2 as the dielectric material.