硼酸
壳体(结构)
硼
粘附
涂层
材料科学
芯(光纤)
缩合反应
化学工程
冷凝
复合材料
图层(电子)
铝
化学
有机化学
催化作用
物理
工程类
热力学
作者
Deniz Gunes,Bünyamin Karagöz
出处
期刊:ACS omega
[American Chemical Society]
日期:2022-11-23
卷期号:7 (48): 43877-43882
被引量:19
标识
DOI:10.1021/acsomega.2c05056
摘要
Herein, new polyborosiloxanes (PBSs) were prepared using a straightforward synthetic approach to obtain a core-shell structure as a material with various features such as better adhesion ability to the applied surface and enhanced thermal properties. In this concept, in situ core-shell formation was allowed by sequential addition of ingredients with fixed conversions. First, pre-condensed polysiloxane was synthesized, with a 60% conversion, as a core by the reaction of phenyltriethoxysilane in the presence of water in an acidic condition. Subsequent addition of boric acid into the pre-condensate and a further condensation reaction resulted in the formation of the shell layer through the introduction of the -Si-O-B- bonds to the network of the PBS. The resulting resin was used as a binder for heat-resistant paint in combination with an aluminum pigment, and the paint applied on a metal plate was found to be resistant up to 600 °C in terms of adhesion strength. It was also demonstrated that the incorporation of boron in the core-shell structure showed better adhesion strength than the one-pot preparation of PBS. Using this method, not only the heat resistance requirement of the industrial coating was achieved but also the flame-retardant ability was introduced.
科研通智能强力驱动
Strongly Powered by AbleSci AI