材料科学
电池(电)
阴极
固态
工程物理
纳米技术
电气工程
功率(物理)
热力学
工程类
物理
作者
Christopher Doerrer,Xiangwen Gao,Junfu Bu,Samuel Wheeler,Mauro Pasta,Peter G. Bruce,Patrick S. Grant
出处
期刊:Nano Energy
[Elsevier BV]
日期:2024-11-30
卷期号:134: 110531-110531
被引量:8
标识
DOI:10.1016/j.nanoen.2024.110531
摘要
Many battery applications target fast charging to achieve an 80 % rise in state of charge (SOC) in < 15 min. However, in the case of all-solid-state batteries (SSBs), they typically take several hours to reach 80 % SOC while retaining a high specific energy of 400 W h k g cell − 1 . We specify design strategies for fast-charging SSB cathodes with long cycle life and investigate the fast-charging capability of a sulfide-based single crystal Li-Ni-Mn-Co oxide composite cathode. At 30 °C and charging at 15 mA cm − 2 , a specific capacity of 150 mA h g − 1 was achieved in ∼ 8 min, with 81 % capacity retention after 3000 cycles. Critically, a 3-electrode arrangement was used to avoid the common problem of overcharging at high current densities. By following the design strategy and optimized manufacturing, a 210 µm thick cathode was able to be charged at an extraordinary current density of 50 mA cm − 2 to reach an areal capacity of 8 mA h cm − 2 in only 10 min, suggesting practical cathodes for SSBs with 400 W h k g cell − 1 may be within reach. • Fast charging at 15 mA cm −2 and room temperature demonstrated in composite cathodes. • 80 % increase in state of charge in < 10 min revealed by a 3-electrode arrangement. • 81 % capacity retention after 3000 fast-charge cycles. • Design guidelines for fast-charging all-solid-state battery cathodes.
科研通智能强力驱动
Strongly Powered by AbleSci AI