Enhanced Wastewater Remediation Using Mesoporous Activated Wheat Straw Biochars: A Dye Removal Perspective

High Resolution Image Download MS PowerPoint Slide The escalating contamination of water bodies by synthetic dyes necessitates innovative and ecoconscious strategies for wastewater treatment. In this study, activated biochars BC-800 (1:0.25), BC-800 (1:0.5), and BC-800 (1:1) from wheat straw were synthesized. Here, ratios denote the mass relationship between wheat straw and potassium hydroxide; “800” represents the pyrolysis temperature. These activated biochars were rigorously characterized revealing the most efficient material, BC-800 (1:1), presenting a surface area of 2578.82 m 2 /g and average pore diameter of 5.51 nm. Across parallel batch experiments, it effectively extracted synthetic dyes (rhodamine B (RhB), methylene blue (MB), and methyl orange (MO)) from wastewater within 15–20 min, primarily through chemisorption pathways. Increased surface area and porosity resulted in a greater dispersion of adsorption sites including C═C linkages (π–π interactions) and H-bonding via surface carbonyl groups (C═O). To understand the adsorption mechanism, Langmuir, Freundlich, and Temkin isotherm models were employed to investigate the equilibrium adsorption behavior. Results show that BC-800 (1:1) followed the Freundlich isotherm (R 2: 0.9659 for RhB, 0.9927 for MB, and 0.9979 for MO, respectively), showing dye molecules form multilayers on the surface of the biochar (π-stacking). Biochar recycling through chemical regeneration demonstrated sustained dye removal efficiency >90% for BC-800 (1:1) over multiple cycles.