材料科学
薄膜
兴奋剂
光电子学
透明导电膜
电阻率和电导率
能量转换效率
退火(玻璃)
氧化铟锡
铟
钙钛矿(结构)
溅射沉积
溅射
纳米技术
化学工程
复合材料
电气工程
工程类
作者
Haixu Liu,Hui Li,Junlei Tao,Jia Liu,Jinzheng Yang,Junjie Li,Jianmin Song,Jie Ren,Min Wang,Shaopeng Yang,Xin Song,Yanfeng Wang
标识
DOI:10.1021/acsami.2c22784
摘要
Transparent conductive film (TCF) is a material that integrates electrical conductivity and optical transparency. It is widely used as an electrode material in thin-film solar cells. However, considerable progress is needed to facilitate its high performance and low-cost preparation. In this study, a preparation scheme for AlF3 and GaF3 co-doped ZnO (FAGZO) thin films was designed and implemented by magnetron sputtering (MS). The mutual restraint between the electrical properties and the wide-spectrum transmission performance of ZnO films was resolved. First-principles calculations showed that the doped ZnO system had n-type conductivity and that the most stable structure was the FO-AlZn-GaZn system. The experimental results verified the theoretical predictions. Single crystalline ZnO transparent conducting films (ZnO-TCFs) of high quality were achieved by MS. After rapid thermal annealing (RTA) treatment, the mobility reached 49.6 cm2/V s, and the resistivity decreased to 3.82 × 10-4 Ω cm. The AT was 90% between 380 and 1200 nm. Furthermore, the application of the prepared FAGZO film in perovskite solar cells (PSCs) has been verified. Compared to the reference indium tin oxide film, the PSCs using the FAGZO film showed higher JSC and power conversion efficiency. These results demonstrate that MS combined with anion and cation co-doping provides an effective means of exploring high-quality and high-performance ZnO-TCFs.
科研通智能强力驱动
Strongly Powered by AbleSci AI