光放大器
铒
放大器
多路复用
波导管
物理
镱
波分复用
光子学
光学
光电子学
兴奋剂
电信
计算机科学
CMOS芯片
激光器
波长
作者
Xucheng Zhang,Jinming Yan,Chunxue Wang,Tonghe Sun,Zhigeng Cao,Chongqian Xu,Guanshi Qin,Fei Wang,Daming Zhang
标识
DOI:10.1109/jlt.2021.3057827
摘要
Mode-division multiplexing (MDM) is a new method of space-division multiplexing (SDM) that can break through the limitation of single-mode transmission capacity and greatly improve the capacity of optical fiber communication. In the case of a few-mode (FM) system, it is possible that each mode can carry its own data steam and transmit long distances owing to a few-mode erbium-doped fiber amplifier (FM-EDFA). In addition, an Er 3+ -Yb 3+ co-doped waveguide amplifier (EYCDWA) based on polymer materials has numerous advantages of miniaturization and flexibility in planar integrated optics compared with the EDFA. This study explored the theory of a few-mode Er 3+ -Yb 3+ co-doped waveguide amplifier (FM-EYCDWA) and established a theoretical model of an FM-EYCDWA with a novel modified overlap integral factor. The differential modal gain (DMG) of the FM-EYCDWA can be reduced or even eliminated by equalizing the modified overlap integral factor of each signal mode. An unprecedented doping configuration adapted to the fabrication process of an optical waveguide was proposed to fill the gap between modal gains, which can be optimized by a genetic algorithm (GA). We investigated two optimization cases of three-mode and five-mode group FM-EYCDWAs to verify the validity of the theoretical model; both cases were optimized to minimize the DMGs under the same limitations, and excellent performance was presented, which demonstrated that the design method of the few-mode amplifiers we presented can offer a referable guideline.
科研通智能强力驱动
Strongly Powered by AbleSci AI