Droplet Directional Movement on the Homogeneously Structured Superhydrophobic Surface with the Gradient Non-Wettability

The surface with the gradient non-wettability intensely appeals to researchers because of its academic significance and applications for directional droplet movement. Herein, we developed a homogeneous structure superhydrophobic surface with the gradient non-wettability by a combination strategy of chemical etching and vapor diffusion modification. As a consequence, the as-prepared surface exhibits a remarkable gradient characteristic of water repellency, and the water contact angle is mainly located within the range of 162 ± 0.5 to 149 ± 0.4°. Meanwhile, the sliding angle also exhibits a corresponding change from 3 to 11°. On this basis, the gradient characteristic of non-wettability induces the distinguishing droplet adhesion on the surface, that is, from 19 μN for the most hydrophobic end to 57 μN for the opposite one. Because of the difference of the water adhesion force, droplets on the as-prepared surface can well roll alongside a specific direction (i.e., gradient direction of non-wettability). In terms of dynamic impact droplets, they can rapidly rebound off the sample surface with the short contact time of 12.8 ms, and the finally fallen droplets mainly deviate toward weaker regions because of water repellency. To analyze this phenomenon, it is found that the asymmetric mechanic behavior is mainly caused by the unbalanced retraction force between the both ends of the impact droplet. This work provides a novel strategy to construct the homogeneous structure superhydrophobic surface with the gradient non-wettability for the applications in the droplet movement control or transport.