微分器
跨导
运算跨导放大器
晶体管
材料科学
电气工程
电子线路
放大器
电压
公共来源
电子工程
场效应晶体管
运算放大器
光电子学
CMOS芯片
工程类
滤波器(信号处理)
作者
Bhargav Avireni,Jitendra Kumar Saini
标识
DOI:10.2174/1876402911666190527085225
摘要
: This paper brings in a new design, namely, voltage mode differentiator with an active element, Carbon Nanotube Field Effect Transistors Voltage Difference Transconductance Amplifier (CNVDTA). The circuit thus proposed needs one Carbon Nanotube Field Effect Transistors Voltage Difference Transconductance Amplifier (CNVDTA) element and a single capacitor. While fabricating IC’s in VLSI design, the proposed circuit proves more adaptable and applicable with the anticipated results. Methods: The proposed CNVDTA based voltage mode differentiator in CNFET technology was simulated at 32 nm at a voltage supply of ±0.9 V using the Cadence Virtuoso CAD tool. Results: It is also reported that the proposed circuit would function with ±0.9 V supply voltage and would also take care of the bias current of the order of 150 µA. Further, on the part of the transconductance (gm), it is electronically tunable with the help of bias current. Conclusion: The CNVDTA based differentiator has been found to be very useful in the triggering circuit of CRO’s, wave shaping circuits, power control circuits etc. It is also found useful in detecting the high-frequency components in the input signals.
科研通智能强力驱动
Strongly Powered by AbleSci AI