聚乙烯醇
乳状液
超亲水性
材料科学
复合数
化学工程
乙烯醇
润湿
多孔性
甲醛
高分子化学
复合材料
化学
有机化学
聚合物
工程类
作者
Di Sha,Run Zheng,Baolong Wang,Jiuduo Xu,Kai Shi,Xu Yang,Xiangling Ji
标识
DOI:10.1016/j.reactfunctpolym.2021.104975
摘要
Regarding emulsion separation using porous materials, two keypoints, i.e. proper average pore size and wettability, should be carefully considered. Herein, three-dimensional (3D) superhydrophilic polyvinyl alcohol-formaldehyde (PVA-PVF) sponges with tunable pore size are successfully prepared through crosslinking reaction of polyvinyl alcohol (PVA) in the polyvinyl alcohol-formaldehyde (PVF) network under acidic condition. The introduction of PVA containing chitosan, diatomite and sodium alginate can effectively decrease the average pore size of PVF from approximately 75 μm to 23 μm along with a few hundred nanometers pore channels, while maintaining porosity above 73.4%. These PVA-PVF composite sponges with hierachical pore structure are applied to separate various surfactantstabilized oil-in-water emulsions solely by gravity. The separation efficiency can reach up to 97.40% with a high water flux of 2.40 × 104 L m−2 h−1 bar−1. Meanwhile, the separation efficiency of different charged PVA-PVF composite sponges (i.e. PVA-CS-PVF, PVA-Si-PVF, PVA-SA-PVF) for oil-in-water emulsions stabilized by different types of surfactants, including anionic, nonionic, and cationic surfactants, is also evaluated. Definitely, the PVA-PVF composite sponges with outstanding hydrophilic, excellent stability, simple preparation method can be regarded as a new candidate of emulsion separation material in practical applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI