电解质
电池(电)
声发射
碳酸盐
材料科学
化学工程
化学
工作(物理)
碳纤维
电极
体积热力学
纳米技术
定制
环境科学
工艺工程
分解
作者
Arthur Fordham,Dylan Wee,Rhodri Jervis
出处
期刊:
日期:2026-10-01
卷期号:31 (10)
摘要
Sodium-ion batteries (NIBs) are a more sustainable and cost-effective alternative to lithium-ion batteries (LIBs), but challenges related to formation and the influence of electrolyte additives on solid electrolyte interphase (SEI) development remain underexplored. In addition, many SEI diagnostic tools are prohibitively expensive. This work investigates operando, non-invasive acoustic techniques, combining passive acoustic emission (AE) and active ultrasonic testing (UT), to monitor SEI formation in NaMn₀.₃₉Fe₀.₃₁Ni₀.₂₂Zn₀.₀₈O₂/hard carbon pouch cells using four electrolyte formulations: a baseline 1 M NaPF₆ in 1:1 EC:DMC, and three with additives (5 wt% fluoroethylene carbonate (FEC), vinylene carbonate (VC), or both). Identical formation protocols were applied, with SEI evolution tracked via AE and UT and correlated with operando gas volume measurements, three-electrode dQ/dV analysis, and X-ray CT. Bespoke machine learning algorithms were developed to interpret acoustic signals. All formulations showed incomplete SEI formation, evidenced by ongoing gas evolution and high irreversible capacity loss after three formation cycles. Formation behaviour correlated with long-term cycling performance: FEC delivered the best results, VC was less effective, and cells without additives performed worst. These findings emphasise the importance of additive selection when using NaPF₆ electrolytes and demonstrate AE and UT as low-cost, real-time tools for SEI monitoring.
科研通智能强力驱动
Strongly Powered by AbleSci AI