蚀刻(微加工)
感应耦合等离子体
材料科学
光子晶体
各向异性
反应离子刻蚀
等离子体刻蚀
光电子学
等离子体
干法蚀刻
光学
复合材料
物理
量子力学
图层(电子)
作者
Wenjie Wang,Libe Arzubiaga,Maryam Shayesteh,Stephen Fenner,Owain Clark,Martin D. B. Charlton
出处
期刊:Journal of vacuum science & technology
[American Institute of Physics]
日期:2025-02-13
卷期号:43 (2)
被引量:1
摘要
Achieving smooth and vertical sidewall profile in the 2D photonic crystals (PhCs) is crucial for the photonic crystal waveguides (PCWs) in integrated optical devices, since “volcano” shaped PhCs lead to light leakage and the drift of photonic bandgap. This paper optimizes the inductively coupled plasma reactive ion etching (ICP-RIE) process for improving the sidewall profile of Ta2O5 PCW with minimum PhC dimension of 300 nm pitch and 185 nm diameter. A set of experiments was generated by statistical software (minitab) to efficiently investigate the region of interest in the process space by varying RF platen power, ICP power, %C4F8 in gas mixture (C4F8 and O2), and chamber pressure. Subsequently, the most suitable experimental conditions were identified and used as the central run for analyzing the influence of individual parameters on ICP etching of Ta2O5. Key findings include the importance of maintaining a 50% C4F8 in total gas flow and trade-offs related to ICP and RF power adjustments. Pressure has a negligible impact on sidewall angle but exerts a more pronounced influence on etch rate and micromasking. A delicate balance among these parameters is crucial for optimal etching results. The recommended recipe (50 W RF platen power, 2000 W ICP power, 10 mTorr pressure, 50% C4F8 in total gas flow) achieves an etch rate of 113.325 nm/min with a smooth and vertical sidewall in PhCs. The entire etching exploration process was conducted on a Ta2O5 layer deposited on a Si substrate. Additionally, this recipe was applied to etch Ta2O5 with a 2 μm SiO2 layer interposed between the Ta2O5 layer and the Si substrate, yielding favorable results and preserving the integrity of the PhC sidewall.
科研通智能强力驱动
Strongly Powered by AbleSci AI