故障树分析
失效模式及影响分析
风险分析(工程)
可靠性工程
系统安全
相互依存
工程类
计算机科学
故障模式、影响和危害性分析
事件树分析
点(几何)
安全工程
组分(热力学)
系统工程
断层(地质)
危害分析
产品(数学)
汽车工业
钥匙(锁)
需求分析
可靠性(半导体)
质量(理念)
危害
关系(数据库)
鉴定(生物学)
风险管理
树(集合论)
根本原因分析
作者
Shanmathi Sri Sowrirajan,Mahesh Kumar,Praveen Somabathula,Ganesh Sugumar
摘要
This manuscript presents a comprehensive study on the integration of Safety Analyses with Technical Safety Requirements (TSRs) to enhance functional safety in complex automotive systems and off-highway applications. It emphasizes the importance of systematically identifying potential hazards and translating them into precise, actionable TSRs that guide the design, implementation, and validation of safety-critical systems. By aligning safety analysis techniques—such as Fault Tree Analysis (FTA) and Failure Mode and Effects Analysis (FMEA)—with ISO 26262, the study demonstrates how safety goals can be effectively transformed into technical specifications that ensure robust system behavior under fault conditions. Part 1 outlines the use of Failure Modes and Effects Analysis (FMEA) to identify potential failure modes and single point faults across system, subsystems, and components. FMEA assesses the severity, likelihood, and detectability of these failures, guiding the development of relevant test cases. The risks uncovered through FMEA serve as a basis for updating the TSRs by implementing safety measures such as redundancy, fail-safe mechanisms, and diagnostic systems to mitigate identified hazards. Part 2 explores the role of Fault Tree Analysis (FTA) in identifying multiple-point failures in a system by performing a deductive (top down) analysis. The insights from FTA further refine TSRs, ensuring that the safety requirements address both simple and complex fault scenarios in the system. Part 3 introduces Dependent Failure Analysis (DFA) to detect interdependent failures and failure propagation paths, focusing on risks from common cause and common point failures. The results of DFA assist in developing more resilient systems by adding redundant paths to prevent or mitigate such dependent failures. Part 4 focuses on safety analysis in production phase, ensuring that Production related Safety requirements are identified in TSC and met during the manufacturing phase, emphasizing traceability, compliance, and verification. Finally, Part 5 presents a case study demonstrating how the integration of Safety Analyses with the ISO 26262 standard results in well-defined TSRs that support system design, testing, and validation, thereby ensuring the product’s safety.
科研通智能强力驱动
Strongly Powered by AbleSci AI