Dynamic stability analysis of jointed rock slopes using the combined finite-discrete element method (FDEM)

The combined finite-discrete element method (FDEM) is an advanced finite element and discrete element coupling method, which is commendably suitable for simulating the slope's entire evolution process from cracking, expansion, penetration, sliding, collision to deposition under seismic load. The original FDEM has apparent shortcomings in simulating the dynamic instability process of earthquake-induced landslides, and some targeted improvements are made to the original program. Numerical tests are carried out to prove the accuracy and robustness of the improved FDEM, and the influence of the structural plane on the dynamic evolution mechanism and process of the slope is studied. The results show that the improved FDEM can accurately reproduce the entire dynamic evolution processes and failure forms of different jointed rock slopes under seismic load and can quantitatively evaluate the dynamic stability of jointed rock slopes (dynamic safety factor and critical failure surface). In addition, the results also emphasize that the slope failure degree significantly affects the dynamic response of the slope and suggest that the combination of the cut-through of the failure surface and the increase of kinetic energy should be used as the criteria for slope dynamic instability simulation by FDEM. This study provides scientific and technological support for revealing the failure mechanism of jointed rock slopes and disaster reduction and prevention.